Home — Guides — Glossary

Coffee Packaging
Glossary

The words used for coffee bags, materials and printing, each explained in a sentence or two.

01

Bag Styles

The shapes a coffee bag comes in.

  • Flat Bottom PouchA bag with a flat base and a gusset on each side. It stands upright and prints on five panels. Also called a box pouch or block bottom bag.
  • Stand Up PouchA pouch with a gusset in the bottom that opens when the bag is filled, so it stands by itself. Also called a doypack.
  • Side Gusset PouchA bag with a fold on each side that opens out when it is filled. The classic shape of a coffee bag.
  • Quad Seal PouchA side gusset bag with all four vertical edges sealed, which keeps the pack square.
  • Three Side Seal PouchA flat pouch sealed on three sides and filled through the fourth. Used for samples and single portions.
  • Center Seal BagA flat bag with one seal down the back and one at each end. Also called a pillow bag.
  • Drip Coffee BagA single-serve filter with paper ears that hang on the rim of a cup. The ground coffee inside is brewed by pouring water through it.
  • Stick PackA narrow sachet for one portion of instant coffee, made from roll film on a packing machine.
  • Spout PouchA stand up pouch with a spout and a screw cap, for liquids such as cold brew.
  • Roll Stock FilmPrinted film supplied on a roll. A packing machine forms it into packs, fills them and seals them.
02

Parts of a Bag

The words used for the construction of a bag.

  • GussetA fold in the side or the bottom of a bag that opens out when the bag is filled and gives it depth.
  • Block bottomA flat, folded base that lets a bag stand. It is an option on a side gusset bag and part of every flat bottom pouch.
  • PanelOne printable face of a bag: the front, the back, a side or the base.
  • Heat sealThe join made by pressing two layers of film together with heat. The inner layer melts and bonds.
  • Back sealThe seal that runs down the back of a side gusset or center seal bag, where the two edges of the film meet.
  • K-sealThe angled seals at the bottom corners of a stand up pouch. They help the base open and carry the weight.
03

Closures & Features

What is added to a bag so that it opens, closes and keeps coffee fresh.

  • Degassing valveA one-way valve that lets the carbon dioxide from freshly roasted coffee out of the bag and keeps air from coming in.
  • ZipperA press-to-close strip below the top seal, with which the customer closes the bag again after opening it.
  • Easy-tear zipperA zipper that is opened with a pull tab and pressed closed again, so the bag does not have to be cut open.
  • Tin tieA bendable band along the top of a bag. The top is folded down and the ends of the band are bent over to hold it.
  • Tear notchA small cut in the edge of a seal that gives a starting point for tearing the bag open.
  • Hang holeA hole punched in the top seal so that the bag can hang on a display hook.
  • WindowA clear area in a printed or paper bag that shows the coffee inside.
  • Hand holeA handle cut through the top seal of a larger bag.
04

Materials

The films and papers a bag is made from.

  • LaminateTwo or more films bonded into one material. Each layer adds a property: a surface to print on, a barrier, strength or a layer that seals.
  • PETPolyester film. Strong and smooth, it is the printed outer layer of most laminates.
  • PEPolyethylene. The inner layer that seals the bag, and in mono-material bags the whole structure.
  • Aluminium foil (AL)A thin layer of aluminium in the middle of a laminate. It has the highest barrier to oxygen, moisture and light.
  • Metallised film (VMPET)Polyester film coated with a very thin layer of aluminium. Lighter and more flexible than foil, with a lower barrier.
  • Kraft paperStrong brown or white paper used as the outer layer for a natural look. It needs a barrier layer behind it.
  • Rice paperA thin paper with visible fibres, laminated over film for a textured surface.
  • Nylon (NY)A tough film added to a laminate for puncture resistance, used in larger bags and spout pouches.
  • EVOHA clear plastic with a high oxygen barrier, used as a thin layer inside recyclable structures.
  • PLAA plastic made from plant starch, used in compostable films and filter materials.
  • Mono-materialA structure made from one type of plastic, usually PE, so that the bag can be recycled in a single stream.
05

Barrier & Freshness

How a bag protects coffee, and how that is measured.

  • BarrierHow well a material keeps oxygen, moisture, light and aroma from passing through it.
  • OTROxygen transmission rate: how much oxygen passes through a material in a day. The lower the figure, the better the barrier.
  • WVTRWater vapour transmission rate: how much moisture passes through a material in a day.
  • DegassingThe release of carbon dioxide from coffee after roasting. It is fastest in the first days.
  • Nitrogen flushingReplacing the air in a bag with nitrogen before sealing, which lowers the oxygen left around the coffee.
  • Shelf lifeThe time coffee keeps its quality in the unopened bag. It depends on the barrier, the seal and the oxygen left inside.
06

Printing & Finishes

How the design gets onto the bag, and what can be done to its surface.

  • Rotogravure printingPrinting from engraved metal cylinders, one for each colour. The cylinders are a one-off cost, and the price per bag is low on long runs.
  • Digital printingPrinting straight from the file, with no cylinders. It suits short runs and many designs.
  • CylinderThe engraved roller that carries one colour in rotogravure printing. A design needs one cylinder for each colour.
  • CMYKThe four process colours, cyan, magenta, yellow and black, which are combined to print full-colour images.
  • Pantone colourA colour mixed as a single ink to a numbered standard, so that a brand colour prints the same every time. Also called a spot colour.
  • White inkA layer of white printed under the colours on clear, metallised or kraft materials, so that the colours stay bright.
  • Reverse printingPrinting on the inside of the outer film before it is laminated. The ink lies between the layers, where it cannot be scratched.
  • Matte and glossThe two basic surfaces of a bag. Matte has no shine; gloss reflects light and makes colours look deeper.
  • Soft-touchA matte surface with a velvety feel.
  • Spot UVA glossy varnish printed on selected areas of a matte bag, so that a logo or a pattern stands out.
  • Foil stampingMetallic foil pressed onto the bag with heat, for gold, silver or coloured metallic details. Also called hot stamping.
07

Ordering & Artwork

The terms that come up between the first inquiry and the finished bags.

  • MOQMinimum order quantity: the smallest number of bags that can be ordered per design.
  • DielineThe flat outline of a bag with its seals, folds and cut lines, on which the artwork is placed. Also called a template.
  • BleedArtwork that runs a few millimetres past the cut line, so that no unprinted edge shows after cutting.
  • Safe areaThe part of a panel that stays clear of seals, zipper and valve. Text and logos belong inside it.
  • ProofYour artwork placed on the template and checked, sent for your approval before printing.
  • Lead timeThe time from the approved proof to the finished bags, before shipping.
  • Form-fill-sealA packing machine that forms packs from roll film, fills them and seals them in one line.

Tell us about
your coffee bag

Send us the bag style, size and quantity you have in mind. We will help you with material and printing options and prepare a quotation.

Get a Quote →
WhatsApp